Our standard Hardware specifications are as follows:

1. Sides : 12mm plywood with veneer on both sides.
2. Back : 9mm plywood with a 3mm birch veneer on one side.
3. Bottom of Base Cabinet : 12mm plywood with a birch veneer on one side.
4. Top of Wall Cabinet : 12mm plywood with birch veneer on both sides.
5. Toe Kick : 12mm plywood with a birch veneer on one side.

6. Shelf : 15mm plywood with a birch veneer on both sides; front side sealed.
7. Drawer : 12mm plywood with a birch veneer on both sides.
8. Bottom of Drawer : 6mm plywood with a birch veneer on one side.
9. Hardware : Standard hinges, Standard dampers, Standard slides, No Knobs. Per your request, we are able to customize your hinges, dampers, sides, and/or knobs. Standard hinges and slides are shown below.